The Charger

Low-cost home charging for your EV from Lemac
Easy to install, and convenient, the Lemac EV Charger provides an economical and efficient solution to charging your vehicle at home. With a stylish compact design, the Lemac EV Charger is fully compliant with all UK safety standards, and is fitted with the latest smart technology.
- Offers plug and play usability and reliability, and the AC single phase Base unit provides a charge rate of up to 7kW
- Charge up to 4 times faster than a standard electrical socket
- Designed and manufactured in the UK

The Lemac universal EV charger is compatible with all plug-in electric vehicles, and is perfect if you have cars with different connector types, or if you are looking to future-proof your home for the next electric vehicle.
- 7kW charger
- Can be reduced to 3.6kW upon installation if your property has a lower power supply
- All safety features included – no need for additional costs
Technical Specification
Parameter | Value |
Operating Temperature Range | -25°C to +40°C |
Storage Temperature | -40°C to +60°C |
Electrical Input | Single-phase (240V with selectable current) Mode 3 |
Output/Rate of charge (Maximum) | 7.4kW at 32A |
Output Connection Type | Untethered |
OZEV Approval required | Yes - home charger |
SMART Capabilities | Yes |
Installation Location | Indoor or Outdoor |
Impact Resistance | IK08 to IEC 62262:2002 |
UV Resistance | BS EN IEC 60068-2-5:2018 |
Flammability Rating | UL Certified to ISO/TR 10093:2018 |
IP Rating | IP54 to BE EN 61851:1 |
Earthing | Inbuilt PEN fault detection to BS 7671:2018 - 722.411.4.1(iv) |

The Lemac Tethered EV charger is supplied with a permanently attached cable that is connected to the charger base unit. This is compatible with any car that has the same connector type.
- 7kW charger
- Can be reduced to 3.6kW upon installation if your property has a lower power supply
- All safety features included – no need for additional costs
Technical Specification
Parameter | Value |
Operating Temperature Range | -25°C to +40°C |
Storage Temperature | -40°C to +60°C |
Electrical Input | Single-phase (240V with selectable current) Mode 3 |
Output/Rate of charge (Maximum) | 7.4kW at 32A |
Output Connection Type | Tethered |
OZEV Approval required | Yes - home charger |
SMART Capabilities | Yes |
Installation Location | Indoor or Outdoor |
Impact Resistance | IK08 to IEC 62262:2002 |
UV Resistance | BS EN IEC 60068-2-5:2018 |
Flammability Rating | UL Certified to ISO/TR 10093:2018 |
IP Rating | IP54 to BE EN 61851:1 |
Earthing | Inbuilt PEN fault detection to BS 7671:2018 - 722.411.4.1(iv) |
Skip navigation Home page Site Map Contact us Top of the page Accessibility Statement